ISO 14122-1:2016

Normserie NEN-EN-ISO 14122 herzien en gepubliceerd. De NEN-EN-ISO 14122 serie van normen: Veiligheid van machines - Permanente toegangsmiddelen tot machines is onlangs herzien en gepubliceerd.

  1. Part 1 of EN ISO 14122 gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor. The dimensions specified are consistent with established ergonomic data given in EN 547-3 'Safety of machinery.
  2. It is intended that this part of ISO 14122 be used with ISO 14122-1 to give the requirements for steps, stepladders and guard-rails. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary.
  3. Download standards through your account (documents are normally available within a few minutes) Once registered, documents can be ordered and downloaded 24 hours a day (excluding periods of technical maintenance).
  4. Ladder, according to 3.1 of EN ISO 14122-1, which is stationary and where the rungs are arranged between and attached to the stiles. The stiles carry the load (see Figure 2) 3.2 fixed ladder with one stile ladder, according to 3.1 of EN ISO 14122-1, which is stationary and where the rungs are attached to both sides of the stile.

Abstract Preview

Din En Iso 14122 Teil 3

ISO 14122-1:2016 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.

It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.

NOTE 1 'Fixed' means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.

ISO 14122-1:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.

NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.

It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122.

Sony vaio recovery disk iso download. If file is multipart don't forget to check all parts before downloading!. How to download sony vaio recovery disk windows 7 files to my device?. Click download file button or Copy sony vaio recovery disk windows 7 URL which shown in textarea when you clicked file title, and paste it into your browsers address bar. 1.

Din En Iso 14122

The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.

ISO 14122-1:2016 is not applicable to machinery manufactured before the date of its publication.

Windows cluster ports. Sep 12, 2016  Windows clustering requires the network configuration be complete and accurate. The network ports should be configured with IP Addresses, DNS, Default Gateways and any other relevant networking details. The DNS IP address will likely be your Active Directory servers, otherwise you will have to guarantee the new servers have IP access to your AD domains. Important This article contains several references to the default dynamic port range. In Windows Server 2008 and later versions, and in Windows Vista and later versions, the default dynamic port range changed to the following range: Start port: 49152; End port: 65535; Windows 2000, Windows XP, and Windows Server 2003 use the following dynamic port range.

For the significant hazards covered by this part of ISO 14122, see Clause 4.


General information

  • Publication date : 2016-06
  • Number of pages : 10
  • :
  • ICS :

Buy this standard

  • CHF58

Life cycle

A standard is reviewed every 5 years

  • 10
    Proposal
  • 30
  • 40
  • 50
  • 60.60
    Publication
  • 90

Din En Iso 14122 4 „ortsfeste Steigleitern

Revisions / Corrigenda

  • Previously
    ISO 14122-1:2001
    ISO 14122-1:2001/Amd 1:2010
  • Now
    ISO 14122-1:2016
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)

Keep up to date with ISO

Steigleiter Din En Iso 14122-4

Sign up to our newsletter for the latest news, views and product information

⇐ ⇐ File Scavenger Full Free
⇒ ⇒ Av Voice Changer 8 Crack